Efficiency House Plus with Electromobility

Efficiency House Plus with ElectromobilityImage Source

General Information:
  • Project name: Efficiency House Plus with Electromobility
  • Project type: new building
  • Building type: single-family house
  • Building Typology: residential
  • Location: Germany, Berlin Region, Berlin Municipality
  • Year of construction: 2011
  • Number of buildings: 1
  • Number of floors: 2

 

Building Size:
  • Gross floor area: 181 m2
  • Gross room area: 645 m2
Building Envelope:
  • Exterior wall: 30 mm Thin-film PV modules; 30 mm Agraffe profile (aluminum); 30 mm Ventilated vertical panels; 20 mm OSB panel and Moisture barrier; 360 mm Cellulose insulation; 20 mm OSB panel; 60 mm vapor barrier; 12,5 mm Plasterboard panels; U=0.11 W/(m2K)
  • Roof: 12,5 mm Plasterboard panels; 50 mm hemp insulation; 160 mm Installation area; 25 mm OSB panel and Vapor barrier; 400 mm Wooden bearer; 400-520 mm Cellulose insulation; 20 mm OSB panel; 2 mm Plastic insulation; 10 mm Protective structural matting; U-value=0,11 W/(m2K)
  • Basement floor: 15 mm wood paneling; 3 mm cork; 2×12,5 mm dry plaster; 30 mm Wood fiber elements in aluminum casings; 25 mm Honeycomb element with filling; 25 mm OSB panel; 400 mm Cellulose insulation; 15 mm Moisture resistant particle board; U-value=0,11 W/(m2K)
  • Window: triple glazing; U=0.70 W/(m2K)
Building service systems:
  • Ventilation: mechanical ventilation and extraction system, with 80% heat recovery.
  • Heating: central heating system with an air-to-water heat pump and floor heating.
  • Photovoltaic installation: 98 m² on the roof and 73 m² modules on the roof and façade, respectively, generating electricity that is used by the building, fed into the grid or stored in a battery with a capacity of 40 kWh.
Building energy performance:
  • Annual heating demand:  20.8 kWh/m2a
  • Primary energy requirement: 61.1 kWh /m2a
  • Renewable energy production: estimated production from solar panels 65.6 kWh/m2a
 Links for further information:
Close It